How To Clean Your Skateboard Wheels And Bearings
How To Clean Your Skateboard Wheels And Bearings. To clean the skateboard wheels, your first and foremost duty is to remove the wheels. It'll save you money in the long run and is kind of fun to do anyway.
Use the socket wrench or skateboard tool to unscrew the axle nut. Use an old toothbrush to scrub away any stubborn dirt or grime. You can use abrasive materials such as steel wool or sandpaper to remove rust from your.
First And Foremost, We Need To Choose A Location Where You Will Be Able To Remove Your Wheels And, Eventually, Your Bearings.
Don’t loose the washers that sit either side of the wheel,. It would be perfect if you had a beautiful flat workbench. Repeat for all eight bearings.
Clean Your Skateboard Wheels With These Simple Steps.
What to use to clean metal bearings. Use an old toothbrush to scrub away any stubborn dirt or grime. Do the same to all the four wheels.
The Bearings Can Be Removed From Skateboard Wheels.
The first step when learning how to clean skateboard bearings, is removing the wheels from your board, which can be done using a common skate tool. Undo the axle nuts with your skate tool or wrench and slide the wheels off the truck axle. Use a small needle or.
Soak A Paper Towel In Rubbing Alcohol And Wipe Down The Wheels.
Things required to clean skateboard wheels. To execute the first step, you’ll need a 13mm socket wrench or ‘t’ shaped skateboard tool. Dip the bearing for, at least, 5 minutes into the solution you have prepared.
Use The Socket Wrench Or Skateboard Tool To Unscrew The Axle Nut.
Use a rag (or a wire brush/old toothbrush) to scrub around the wheels. First, use a piece of cloth or an old toothbrush scrub any mud and grime from the wheels. Pour cleaning solution into a jar.
Post a Comment for "How To Clean Your Skateboard Wheels And Bearings"